 |
 |
| |
 2D
Measurement |
 |
|
|
|
|
|
|
| 3D
Measurement |
|
|
|
|
|
|
|
| Fiber
Optic Inspection |
|
|
|
|
|
|
|
|
|
| |
|
|
|
 |
|
| The FIS-100
is the high precision non-contact ferrule inspection
system using optical vision image that acquires
the image of ferrules using CCD camea and automatically
measures the outer dimeter, inner diameter, outter
circle roundness, inner circle roundness, concentricity,
fiber eparation, etc. of ferrules. |
|
|
 |
 |
| |
|
 |
Measurement of Outer Diameter :The
outer diameter of the ferrules |
|
Measurement of Roundness of Outer Circle :The
roundness of outer circle |
|
Measurement of Concetricity :The Concentricity
means the distance beteen the
center of outer circle and the center of inner core |
|
Measurement of Inner Diameter :The
inner diameter of the ferrules |
|
Measurement of Roundness of Inner Core :The
roundness of inner core |
| |
|
|
|
 |
| |
|
|
Optics Based Vision Inspection system |
|
Measuement of various fundamental parmenters for ferrule
with one setup |
|
Precision Inspection system based on more than 1,000
points of sampling for every
ferrule profiles |
|
High precision algorihm for ferrule inspection using
the sub pixel calculation scheme |
|
Inspection system for ferrules of multiple cores |
|
Inspection system for ferrules of variety of cores
patterns |
| |
 |
|
Enaborate jigs/trays with multiple illumination unit
for ferrules of various shapes/colors |
| |
 |
|
Traceable calibration schemes/analysis schemes |
|
User friendliness and convenience |
| |
 |
| |
|
|
|
 |
| Specification |
| ABSTRACT |
 Automatic
inspection of ferrules in ferrules in ferrue tray
(100 ferrules)
Acquiition of the images of ferrules using CCD camera
and
meaurement of outer diameter,inner
diameter, outer circle
roundness, inner circle roundness,
concentricity, separation of
ferrules |
| SYSTEM |
Hardware
(1) Robot
(2) Ferrule Tray
(3) Optical Unit
(4) LED Controller
(4) WORK Frame
Software
- PC (Image Processing)
- OS : Windows 98 or upward
- S/W : FIS-100 S/W. Application
S/W (MS Excel)
- Board : Image Grabber I/O Card
(for Robot Control)
- Monitor : LCD 15"MONITOR |
SPECIFICATION
OF PRODUCT |
Robot
- Type : Desktop Type - Control
Axis : 3 Axis
- Communication Interface : RS
232C
- Motor : Servo Motor(100W)
- Input Power Capacity : MAX2.4kVA
- Voltage/Frequency : AC 200V,
50/60KHZ -Weight :55 kg
- Safety Protection : Dynamic
brake and discharge resistor
for recovery
- Cooling type of radiation :
Natural air cooling and cooling and fan
- Safety Feature : Over current,
Over voltage, Over load,
Encoder error
Ferrule
Tray
(1) Robot
- Insection Number of Ferrules
: 100 ferrule (1tray) per one time
- Ferrule Diameter : 1.8mm, 2.0mm,
2.5mm, etc
(2) Ferrule Tray
- Light Source : Red LED, Safe
Light Source, 2.Ferrule Tray
PC Auto ControlPC Auto Control
Optical
Unit
(1) CCD CAMERA (DUAL)
- CAMERA A (Large circle of a
ferrule section)
- CAMERA B (Small circle of a
ferrule section)
(2) Upper Light
- Light Source
- Red LED, Safe Light Source Manual
control Using LED Controller
(3) Specicial Lens
LED
CONTROLLER
- For Upper Light Control
- Manual Control Using Dial Switch
|
| CAPACITY |
Resolution
: 0.1㎛
Repeatability
(1) Outer Dimeter : 0.3㎛
(2) Inner Diameter : 0.2㎛
(3) Sparation : 0.2㎛
(4) Concentricity : 0.3㎛
Ferrule
Mode : Single Ferrule, Multiple Cores Ferrule (2,4,8 Cores)
|
| PARAMETERS |
Outer
Diameter
Outer
Circle Roundness
Inner
Diameter
Inner
Core Roundnes
Concentricity
Fiber
Separation |
| OPTION |
Work
frame
17inch : LCD MONITOR |
|
|
| |
|
|
